Difference between revisions of "DPSI BUS HUB"
Line 3: | Line 3: | ||
==Product description== | ==Product description== | ||
[[File:A15060 00.jpg|640x400.jpg|350px|thumb|none|DPSI BUS HUB]] | [[File:A15060 00.jpg|640x400.jpg|350px|thumb|none|DPSI BUS HUB]] | ||
− | + | ||
− | + | The DPSI BUS HUB is a digital bus distribution module which can feed through common sum signals. It is equipped with the connectors and can be extended if desired. | |
+ | The DPSI BUS HUB ensures connections of approx. '''ten bus servos''' without soldering. The servos can be connected with the '''HUB-2 and HUB-3''' plug system or with '''latching Bus wing plugs and sockets''' to the DPSI BUS HUB. | ||
==Connections and wiring== | ==Connections and wiring== |
Revision as of 10:28, 22 October 2015
Contents
Product description
The DPSI BUS HUB is a digital bus distribution module which can feed through common sum signals. It is equipped with the connectors and can be extended if desired. The DPSI BUS HUB ensures connections of approx. ten bus servos without soldering. The servos can be connected with the HUB-2 and HUB-3 plug system or with latching Bus wing plugs and sockets to the DPSI BUS HUB.
Connections and wiring
Flächen-Verkabelung
Der Anschluss zu den Flächen erfolgt über 30cm lange Silikonkabel mit verriegelbaren Flächensteckern. Bei dünnen Flächenprofilen können in den Tragflächen die Bus-Flächenstecker für 2 bzw. 3 Servos eingesetzt werden.
Alternativ können bei dickeren Flächenprofilen auch die Bus-Flächenkabel mit Stecker zum Einsatz kommen. Der Servoanschluss erfolgt hierbei über Servo SinglePorts.
Rumpf-Verkabelung
Servos im hinteren Rumpfteil werden an ein 120cm langes integrierte HUB-2 Kabel angeschlossen, weitere Servos können über zusätzliche HUB-2 oder HUB-3-Kabel angeschlossen werden.
Connections diagram
Connector | Description |
---|---|
1 | Bus connection cable with sockets to connect wing plugs |
2 | Hub2 bus cable to connect bus servos |
Specifications
Input voltage | 6V - 8.4V (5 NiMH or 2S Li++) |
Output voltage (regulated for RX output) | 5.9V |
Ampacity (RX output) | Permanent 2A, Peak 10A @ 2S LiPo battery |
Output voltage (unregulated for servos) | Identical to the input voltage |
Ampacity (unregulated output) | Permanent 8A, Peak 16A |
Power-on control | LED |
Quiescent current | approx. 3.5mA @ 7.4V |
Max. amount servos | 10 |
Dimensions | 50mm x 39mm x 14mm |
Weight | approx. 86 Gramm |