DPSI Remote switch actuator (Duplex)
Contents
Product description
The DPSI Remote switch actuator (Duplex) is a switch actuator suitable for DPSI dual power supplies that can be used with Jeti Duplex systems. The DPSI Remote switch actuator (Duplex) is composed of the Jeti Duplex RCSW RC switch and the EMCOTEC RCSW adapter. Using the DPSI Remote switch actuator (Duplex) DPSI dual power supplies can be switched on and off with the transmitter.
Variants and delivery contents
The DPSI Remote switch actuator (Duplex) is composed of above-named the modules. Certainly the EMCOTEC RCSW adapter can also be purchased stand-alone when a existing Jeti Duplex RCSW RC switch should be upgraded. So the DPSI Remote switch actuator (Duplex) is available in two variants:
Variant | Description |
---|---|
RCSW adapter | Contains a single EMCOTEC RCSW adapter for upgrading an existing Jeti Duplex RCSW RC switch. |
RCSW adapter with RCSW | Contains an EMCOTEC RCSW adapter and a Jeti Duplex RCSW RC switch. |
Compatibility
The DPSI Remote switch actuator (Duplex) is compatible with the listet DPSI dual power supplies:
- DPSI RV Mini series
- DPSI 2001 RV Version 2014
- DPSI RV (2010)
- DPSI 2018 Duplex Edition
Notice
- The DPSI Remote switch actuator (Duplex cannot be used with the dual power supply DPSI Ampere.
- The DPSI Remote switch actuator (Duplex) can only be used with Jeti Duplex systems. Usage with other manufacturer's systems is not possible.
First start-up
Bevor der DPSI Fernsteuerschaltgeber (Duplex) benutzt werden kann, muss er einmalig eingerichtet werden. Hierfür muss wie folgt vorgegangen werden:
- Jeti Duplex RCSW RC-Switch an die Anlage binden ohne dass EMCOTEC RCSW Adapter angesteckt ist.
- Akkus an die DPSI-Doppelstromversorgung anschließen.
- EMCOTEC RCSW Adapter ohne den Jeti Duplex RCSW RC-Switch an den Schaltgeberanschluss der DPSI-Doppelstromversorgung anschließen. Die DPSI-Doppelstromversorgung schaltet sich automatisch ein.
- Den Jeti Duplex RCSW RC-Switch an den EMCOTEC RCSW Adapter anschließen. Die DPSI-Doppelstromversorgung schaltet sich automatisch ab (da sich der Jeti Duplex RCSW RC-Switch im "OFF"-Zustand befindet).
Die DPSI-Doppelstromversorgung lässt sich nun mit dem DPSI Fernsteuerschaltgeber ein- und ausschalten.
Informationen zum Anschließen des DPSI Fernsteuerschaltgebers (Duplex) finden Sie im Kapitel Anschlüsse.
Hinweise
- Im Menü des Jeti Duplex RCSW RC-Switch muss der Menüpunkt Invertierte Polarität deaktiviert sein. Der Jeti Duplex RCSW RC-Switch lässt sich sonst nicht mit dem EMCOTEC RCSW Adapter betreiben.
- Zum Betrieb des DPSI Fernsteuerschaltgebers (Duplex) ist eine Akkuspannung von mindestens 7 Volt notwendig. Bei einer niedrigeren Spannung ist der Einschaltvorgang nicht möglich. Es können daher nur Akkus verwendet werden, deren Nennspannung bei 7,2 Volt oder 7,4 Volt liegt (z. B. LiPo- oder LiIon-Akkus).
Connections
Der Jeti Duplex RCSW RC-Switch wird rechts an der Unterseite des EMCOTEC RCSW Adapters angeschlossen. Die Polung wird auf beiden Modulen angegeben. Auf dem Jeti Duplex RCSW RC-Switch muss der Anschluss Control Output benutzt werden. Der EMCOTEC RCSW Adapter wird an den Schaltgeberanschluss der entsprechenden DPSI-Akkuweiche angeschlossen.