Difference between revisions of "LED resistor tables"
(→Resistor table) |
(→General information) |
||
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
[[Category:Lighting]] | [[Category:Lighting]] | ||
[[de:LED-Widerstandstabellen]] | [[de:LED-Widerstandstabellen]] | ||
+ | ==General information== | ||
+ | <gallery> | ||
+ | Image:Opt4300 01.jpg| 0.6 watts resistors | ||
+ | Image:Opt4305 01.jpg| 3 watts resistors | ||
+ | </gallery> | ||
+ | |||
==Landing lights, position ligths and SEOUL Power LEDs== | ==Landing lights, position ligths and SEOUL Power LEDs== | ||
<div class="info">In all landing lights and position lights (exception Glider ACLs and Universal ACLs) SEOUL 3 Watt Power LEDs are used. SEOUL LEDs are unsurpassed in their efficiency so they are used even in power saving lamps. As an alternative to conventional fluorescent lamps or glow lamps the LED makes history in the lighting engineering industry. Due to special own patent based phosphor and housing technologies this LED stands out due to maximum light flux, very good thermic resistance coefficient and high heat conductance. SEOUL LEDs belong to the most efficient and brightest electroluminescent diodes in the world.</div> | <div class="info">In all landing lights and position lights (exception Glider ACLs and Universal ACLs) SEOUL 3 Watt Power LEDs are used. SEOUL LEDs are unsurpassed in their efficiency so they are used even in power saving lamps. As an alternative to conventional fluorescent lamps or glow lamps the LED makes history in the lighting engineering industry. Due to special own patent based phosphor and housing technologies this LED stands out due to maximum light flux, very good thermic resistance coefficient and high heat conductance. SEOUL LEDs belong to the most efficient and brightest electroluminescent diodes in the world.</div> | ||
Line 488: | Line 494: | ||
|12R | |12R | ||
|} | |} | ||
− | <div class="info"> | + | <div class="info">The resistor values refer to pre-resistors with <span style="color: #cc6633; font-weight: bold;">0.6 watts electrical power</span> and <span style="color: #cc6633; font-weight: bold;">1 percent tolerance</span> respectively <span style="font-weight: bold;">3 watts electrical power</span> and <span style="font-weight: bold;">5 percent tolerance.</span></div> |
==Superflux-LEDs== | ==Superflux-LEDs== | ||
Line 569: | Line 575: | ||
|150R | |150R | ||
|} | |} | ||
− | <div class="info"> | + | <div class="info">The resistor values refer to pre-resistors with <span style="font-weight: bold;">0.6 watts electrical power</span> and <span style="font-weight: bold;">1 percent tolerance.</span></div> |
− | == | + | ==General safety== |
− | <div class="caution"> | + | <div class="caution">CAUTION: LEDs are very bright, don't look into the cone of light from closer distance. This could cause damage of the retina.</div> |
Revision as of 08:49, 4 February 2015
Contents
General information
Landing lights, position ligths and SEOUL Power LEDs
In all landing lights and position lights (exception Glider ACLs and Universal ACLs) SEOUL 3 Watt Power LEDs are used. SEOUL LEDs are unsurpassed in their efficiency so they are used even in power saving lamps. As an alternative to conventional fluorescent lamps or glow lamps the LED makes history in the lighting engineering industry. Due to special own patent based phosphor and housing technologies this LED stands out due to maximum light flux, very good thermic resistance coefficient and high heat conductance. SEOUL LEDs belong to the most efficient and brightest electroluminescent diodes in the world.
Specifications
White | Warm white | Red | Green | Blue | |
---|---|---|---|---|---|
Brightness | 100lm | 65lm | 48lm | 80lm | 22lm |
Angle of radiation | 127° | 124° | 130° | 130° | 130° |
max. current | 350mA | 350mA | 350mA | 350mA | 350mA |
Voltage | 3.25V | 3.25V | 2.30V | 3.25V | 3.25V |
Resistor table
Mode | Battery type | White | Warm white | Red | Green | Blue |
---|---|---|---|---|---|---|
Permanent operating | 1S LiPo / LiIon | 0R82 | 0R82 | 2R2 | 0R82 | 0R82 |
4.8V NiMH | 2R7 | 2R7 | 3R9 | 2R7 | 2R7 | |
2S LiPo / LiIon | 6R8 | 6R8 | 8R2 | 6R8 | 6R8 | |
2S LiFePO4 | 4R7 | 4R7 | 6R8 | 4R7 | 4R7 | |
Flash operating | 1S LiPo / LiIon | 0R47 | 0R47 | 1R8 | 0R47 | 0R47 |
4.8V NiMH | 1R8 | 1R8 | 3R9 | 1R8 | 1R | |
2S LiPo / LiIon | 4R7 | 4R7 | 6R8 | 4R7 | 4R7 | |
2S LiFePO4 | 3R3 | 3R3 | 5R6 | 3R3 | 3R3 |
The resistor values refer to pre-resistors with 3 watts electrical power and 5 percent tolerance.
Segler-ACLs / Universal-ACLs
Specifications
White | Red | Green | |
---|---|---|---|
Brightness | 1536lm | 165lm | 285lm |
Angle of radiation | 125° | 123° | 128° |
max. current | 4500mA | 2100mA | 2100mA |
Voltage | 3.45V | 2.5V | 3.8V |
Resistor table
Mode | Battery type | White | Red | Green |
---|---|---|---|---|
Single Glider ACL or Universal ACLs | 1S LiPo / LiIon | no resistor | 0R68 | no resistor |
4.8V NiMH | 0R33 | 1R8 | 0R47 | |
2S LiPo / LiIon | 0R82 | 2R2 | 1R8 | |
2S LiFePO4 | 0R68 | 3R9 | 1R5 | |
Series connection Glider ACLs | 1S LiPo / LiIon | not possible | not possible | not possible |
4.8V NiMH | not possible | not possible | not possible | |
2S LiPo / LiIon | no resistor | 0R47 | no resistor | |
2S LiFePO4 | not possible | not possible | not possible |
The resistor values refer to pre-resistors with 3 watts electrical power and 5 percent tolerance.
5mm-LEDs
Specifications
White | Warm white | Red | Green | Blue | Gelb | |
---|---|---|---|---|---|---|
Brightness | 44.000mcd | 31.000mcd | 14.000mcd | 24.000mcd | 13.950mcd | 10.400mcd |
Angle of radiation | 15° | 15° | 20° | 20° | 15° | 20° |
max. current | 20mA | 20mA | 20mA | 20mA | 20mA | 20mA |
Voltage | 3.20V | 3.20V | 2.20V | 3.20V | 3.20V | 3.50V |
Resistor table
Battery type | White | Warm white | Red | Green | Blue | Gelb |
---|---|---|---|---|---|---|
1S LiPo / LiIon | 56R2 | 56R2 | 110R | 56R2 | 56R2 | 39R |
4.8V NiMH | 121R | 121R | 182R | 121R | 121R | 110R |
2S LiPo / LiIon | 274R | 274R | 309R | 274R | 274R | 249R |
2S LiFePO4 | 200R | 200R | 249R | 200R | 200R | 182R |
The resistor values refer to pre-resistors with 0.6 watts electrical power and 1 percent tolerance.
5mm Rainbow LEDs
Processing time for a complete color change is approx. 30 seconds.
Specifications
Battery type | f | a | r | b | i | g |
---|---|---|---|---|---|---|
Brightness | 9.700mcd | |||||
Angle of radiation | 25° | |||||
max. current | 40mA | |||||
Voltage | 4.50V |
Resistor table
Battery type | f | a | r | b | i | g |
---|---|---|---|---|---|---|
1S LiPo / LiIon | 2R21 | |||||
4.8V NiMH | 33R2 | |||||
2S LiPo / LiIon | 110R | |||||
2S LiFePO4 | 68R1 |
The resistor values refer to pre-resistors with 0.6 watts electrical power and 1 percent tolerance.
5mm Flash LEDs
Specifications
White | Red | Green | Blue | |
---|---|---|---|---|
Brightness | 15,000mcd | 15,000mcd | 15,000mcd | 9,000mcd |
Angle of radiation | 20° | 15° | 15° | 15° |
max. current | 30mA | 20mA | 20mA | 20mA |
Voltage | 4.50V | 2.20V | 3.60V | 3.60V |
Resistor table
Battery type | White | Red | Green | Blue |
---|---|---|---|---|
1S LiPo / LiIon | 2R21 | 82R | 27R | 27R |
4.8V NiMH | 47R | 162R | 100R | 100R |
2S LiPo / LiIon | 150R | 274R | 221R | 221R |
2S LiFePO4 | 100R | 249R | 162R | 162R |
The resistor values refer to pre-resistors with 0.6 watts electrical power and 1 percent tolerance.
8.2mm-LEDs
Specifications
White | Red | Green | Blue | |
---|---|---|---|---|
Brightness | 40lm | 20lm | 30lm | 18lm |
Angle of radiation | 120° | 120° | 120° | 120° |
max. current | 350mA | 350mA | 350mA | 350mA |
Voltage | 3.65V | 2.80V | 3.65V | 3.65V |
Resistor table
Battery type | White | Red | Green | Blue |
---|---|---|---|---|
1S LiPo / LiIon | 1R62 | 4R02 | 1R62 | 1R62 |
4.8V NiMH | 5R6 | 8R2 | 5R6 | 5R6 |
2S LiPo / LiIon | 15R | 18R | 15R | 15R |
2S LiFePO4 | 12R | 15R | 12R | 12R |
The resistor values refer to pre-resistors with 0.6 watts electrical power and 1 percent tolerance respectively 3 watts electrical power and 5 percent tolerance.
Superflux-LEDs
Specifications
White | Warm white | Red | Green | Blue | |
---|---|---|---|---|---|
Brightness | 20lm | 18lm | 9lm | 7lm | 2lm |
Angle of radiation | 80° | 70° | 100° | 100° | 100° |
max. current | 50mA | 50mA | 50mA | 30mA | 30mA |
Voltage | 3.10V | 3.10V | 2.40V | 3.40V | 3.40V |
Resistor table
Battery type | White | Warm white | Red | Green | Blue |
---|---|---|---|---|---|
1S LiPo / LiIon | 22R1 | 22R1 | 39R2 | 27R4 | 27R4 |
4.8V NiMH | 56R2 | 56R2 | 68R1 | 82R5 | 82R5 |
2S LiPo / LiIon | 110R | 110R | 121R | 182R | 182R |
2S LiFePO4 | 82R5 | 82R5 | 100R | 150R | 150R |
The resistor values refer to pre-resistors with 0.6 watts electrical power and 1 percent tolerance.
General safety
CAUTION: LEDs are very bright, don't look into the cone of light from closer distance. This could cause damage of the retina.