Difference between revisions of "Template:DPSI Micro mounting suggestion EN"
| Line 1: | Line 1: | ||
[[de:Vorlage:DPSI Micro Montagevorschlag DE]] | [[de:Vorlage:DPSI Micro Montagevorschlag DE]] | ||
| − | + | ==Mounting suggestions== | |
| + | The DPSI Micro must be fixed at the RC plane's fuselage inner sidewall. DPSI Micro Systems can be switched on and off contactless with an external magnet. So only a small drilling hole with five millimeters of diameter must be drilled into the fuselage. | ||
| + | |||
| + | ===Sticking on the DPSI Micro system=== | ||
| + | The DPSI Micro can be sticked on with silicone directly on the fuselage's inner sidwall. | ||
| + | |||
| + | ===Screwing on the DPSI Micro system=== | ||
| + | or fixed with screws | ||
| + | |||
| + | |||
| + | Now feed the screws through the screwing holes. The screws serve as positioning helps for the self-adhesive foam rubber, which serves as vibration protection. It is pushed over the screws from inside and glued to the fuselage's sidewall. This anti vibration mat is not mandatory, but advisable especially for combustion engines. Possibly small fuselage unevenness is eliminated, too. | ||
| + | |||
| + | The DPSI Micro is now mounted with included M3 screws. The screwing collars enlarge the area of support and inhibit in this way damage to the fuselage. The screwing position of the DPSI Micro housing allows the screws to cut their way themselves. Don't tighten the screws too much, in order not to press the cellular rubber too extensively. | ||
| + | |||
| + | <gallery> | ||
| + | File:DPSI-Micro Moosgummi 640x400.jpg|Foam rubber vibration protection | ||
| + | File:DPSI-Micro Einbau-Innenseite 640x400.jpg|DPSI Micro on the fuselage's inner wall | ||
| + | </gallery> | ||
Revision as of 08:51, 29 October 2018
Mounting suggestions
The DPSI Micro must be fixed at the RC plane's fuselage inner sidewall. DPSI Micro Systems can be switched on and off contactless with an external magnet. So only a small drilling hole with five millimeters of diameter must be drilled into the fuselage.
Sticking on the DPSI Micro system
The DPSI Micro can be sticked on with silicone directly on the fuselage's inner sidwall.
Screwing on the DPSI Micro system
or fixed with screws
Now feed the screws through the screwing holes. The screws serve as positioning helps for the self-adhesive foam rubber, which serves as vibration protection. It is pushed over the screws from inside and glued to the fuselage's sidewall. This anti vibration mat is not mandatory, but advisable especially for combustion engines. Possibly small fuselage unevenness is eliminated, too.
The DPSI Micro is now mounted with included M3 screws. The screwing collars enlarge the area of support and inhibit in this way damage to the fuselage. The screwing position of the DPSI Micro housing allows the screws to cut their way themselves. Don't tighten the screws too much, in order not to press the cellular rubber too extensively.
Foam rubber vibration protection
DPSI Micro on the fuselage's inner wall
