Servo signal distribution
Some DPSI dual power supplies are equipped with an internal servo signal distribution feature. To use this feature the servo signals must be feeded through the DPSI dual power supply. The receiver's servo channels to which the servos must be connected usually must be connected to the servo inputs of the DPSI dual power supply. Then the servos must be connected to the servo outputs of the DPSI dual power supply.
The DPSI dual power supplies use integrated V-cables distributing the servo signal which is feeded through the DPSI dual power supply to up to 4 servos. So it is possible to operate e. g. 4 servos at one receiver channel.
DPSI dual power supplies with servo signal distribution
The following DPSI dual power supplies are equiopped with servo signal distribution:
Example for servo signal distribution
The picture below shows the servo signal distribution at the example of the DPSI RV Mini 5. At this DPSI dual power supply the signals of the DPSI channels 1, 3 and 5 are feeded to two outputs. So via the receiver channels feeded through the DPSI channels two servos can be operated on each channel.