LED resistor tables

From Hacker Motor Wiki
Jump to: navigation, search

General information

Landing lights, position ligths and SEOUL Power LEDs

In all landing lights and position lights (exception Glider ACLs and Universal ACLs) SEOUL 3 Watt Power LEDs are used. SEOUL LEDs are unsurpassed in their efficiency so they are used even in power saving lamps. As an alternative to conventional fluorescent lamps or glow lamps the LED makes history in the lighting engineering industry. Due to special own patent based phosphor and housing technologies this LED stands out due to maximum light flux, very good thermic resistance coefficient and high heat conductance. SEOUL LEDs belong to the most efficient and brightest electroluminescent diodes in the world.

Specifications

Table 1a: Landing lights, position ligths and SEOUL Power LEDs
White Warm white Red Green Blue
Brightness 100lm 65lm 48lm 80lm 22lm
Angle of radiation 127° 124° 130° 130° 130°
max. current 350mA 350mA 350mA 350mA 350mA
Voltage 3.25V 3.25V 2.30V 3.25V 3.25V

Resistor table

Table 1b: Resistors Landing lights, position ligths and SEOUL Power LEDs
Mode Battery type White Warm white Red Green Blue
Permanent operating 1S LiPo / LiIon 0R82 0R82 2R2 0R82 0R82
4.8V NiMH 2R7 2R7 3R9 2R7 2R7
2S LiPo / LiIon 6R8 6R8 8R2 6R8 6R8
2S LiFePO4 4R7 4R7 6R8 4R7 4R7
Flash operating 1S LiPo / LiIon 0R47 0R47 1R8 0R47 0R47
4.8V NiMH 1R8 1R8 3R9 1R8 1R
2S LiPo / LiIon 4R7 4R7 6R8 4R7 4R7
2S LiFePO4 3R3 3R3 5R6 3R3 3R3
The resistor values refer to pre-resistors with 3 watts electrical power and 5 percent tolerance.

Segler-ACLs / Universal-ACLs

Specifications

Table 2a: Specifications Glider ACLs / Universal ACLs
White Red Green
Brightness 1536lm 165lm 285lm
Angle of radiation 125° 123° 128°
max. current 4500mA 2100mA 2100mA
Voltage 3.45V 2.5V 3.8V

Resistor table

Table 2b: Resistors Glider ACLs / Universal ACLs
Mode Battery type White Red Green
Single Glider ACL or Universal ACLs 1S LiPo / LiIon no resistor 0R68 no resistor
4.8V NiMH 0R33 1R8 0R47
2S LiPo / LiIon 0R82 2R2 1R8
2S LiFePO4 0R68 3R9 1R5
Series connection Glider ACLs 1S LiPo / LiIon not possible not possible not possible
4.8V NiMH not possible not possible not possible
2S LiPo / LiIon no resistor 0R47 no resistor
2S LiFePO4 not possible not possible not possible
The resistor values refer to pre-resistors with 3 watts electrical power and 5 percent tolerance.

5mm-LEDs

Specifications

Table 3a: Specifications 5mm LEDs
White Warm white Red Green Blue Gelb
Brightness 44.000mcd 31.000mcd 14.000mcd 24.000mcd 13.950mcd 10.400mcd
Angle of radiation 15° 15° 20° 20° 15° 20°
max. current 20mA 20mA 20mA 20mA 20mA 20mA
Voltage 3.20V 3.20V 2.20V 3.20V 3.20V 3.50V

Resistor table

Table 3b: Resistors 5mm LEDs
Battery type White Warm white Red Green Blue Gelb
1S LiPo / LiIon 56R2 56R2 110R 56R2 56R2 39R
4.8V NiMH 121R 121R 182R 121R 121R 110R
2S LiPo / LiIon 274R 274R 309R 274R 274R 249R
2S LiFePO4 200R 200R 249R 200R 200R 182R
The resistor values refer to pre-resistors with 0.6 watts electrical power and 1 percent tolerance.

5mm Rainbow LEDs

Processing time for a complete color change is approx. 30 seconds.

Specifications

Table 4a: Resistors 5mm Rainbow LEDs
Battery type f a r b i g
Brightness 9.700mcd
Angle of radiation 25°
max. current 40mA
Voltage 4.50V

Resistor table

Table 4b: 5mm Rainbow LEDs
Battery type f a r b i g
1S LiPo / LiIon 2R21
4.8V NiMH 33R2
2S LiPo / LiIon 110R
2S LiFePO4 68R1
The resistor values refer to pre-resistors with 0.6 watts electrical power and 1 percent tolerance.

5mm Flash LEDs

Specifications

Table 5a: Specifications 5mm Flash LEDs
White Red Green Blue
Brightness 15,000mcd 15,000mcd 15,000mcd 9,000mcd
Angle of radiation 20° 15° 15° 15°
max. current 30mA 20mA 20mA 20mA
Voltage 4.50V 2.20V 3.60V 3.60V

Resistor table

Table 5b: Resistors 5mm Flash LEDs
Battery type White Red Green Blue
1S LiPo / LiIon 2R21 82R 27R 27R
4.8V NiMH 47R 162R 100R 100R
2S LiPo / LiIon 150R 274R 221R 221R
2S LiFePO4 100R 249R 162R 162R
The resistor values refer to pre-resistors with 0.6 watts electrical power and 1 percent tolerance.

8.2mm-LEDs

Specifications

Table 6a: Specifications 8.2mm-LEDs
White Red Green Blue
Brightness 40lm 20lm 30lm 18lm
Angle of radiation 120° 120° 120° 120°
max. current 350mA 350mA 350mA 350mA
Voltage 3.65V 2.80V 3.65V 3.65V

Resistor table

Table 6b: Resistors 8.2mm-LEDs
Battery type White Red Green Blue
1S LiPo / LiIon 1R62 4R02 1R62 1R62
4.8V NiMH 5R6 8R2 5R6 5R6
2S LiPo / LiIon 15R 18R 15R 15R
2S LiFePO4 12R 15R 12R 12R
The resistor values refer to pre-resistors with 0.6 watts electrical power and 1 percent tolerance respectively 3 watts electrical power and 5 percent tolerance.

Superflux-LEDs

Specifications

Table 7a: Specifications Superflux LEDs
White Warm white Red Green Blue
Brightness 20lm 18lm 9lm 7lm 2lm
Angle of radiation 80° 70° 100° 100° 100°
max. current 50mA 50mA 50mA 30mA 30mA
Voltage 3.10V 3.10V 2.40V 3.40V 3.40V

Resistor table

Table 7b: Resistors Superflux LEDs
Battery type White Warm white Red Green Blue
1S LiPo / LiIon 22R1 22R1 39R2 27R4 27R4
4.8V NiMH 56R2 56R2 68R1 82R5 82R5
2S LiPo / LiIon 110R 110R 121R 182R 182R
2S LiFePO4 82R5 82R5 100R 150R 150R
The resistor values refer to pre-resistors with 0.6 watts electrical power and 1 percent tolerance.

General safety

CAUTION: LEDs are very bright, don't look into the cone of light from closer distance. This could cause damage of the retina.