DPSI BUS HUB
Contents
Product description
The DPSI BUS HUB is a digital bus distribution module which can feed through common sum signals. It is equipped with the connectors and can be extended if desired. The DPSI BUS HUB ensures connections of approx. ten bus servos without soldering. The servos can be connected with the HUB-2 and HUB-3 plug system or with latching Bus wing plugs and sockets to the DPSI BUS HUB.
Connections and wiring
Wing wiring
The connection to the wings is made with 12in long silicon cables with latching wing plugs. For thin wing profiles inside the wings the Bus wing plugs for 2 or 3 servos can be used. With thick wing profiles alternatively the Bus wing cable with plug can be used. Then servo connection is made with Servo SinglePorts.
Fuselage wiring
Servos inside the fuseslage's backside can be connected to a 47in integrated HUB-2 cable. Further servos can be connected with additional BUS HUB-2 or BUS HUB-3 cables.'
Connections diagram
Connector | Description |
---|---|
1 | Bus connection cable with sockets to connect wing plugs |
2 | Hub2 bus cable to connect bus servos |
Specifications
Input voltage | 6V - 8.4V (5 NiMH or 2S Li++) |
Output voltage (regulated for RX output) | 5.9V |
Ampacity (RX output) | Permanent 2A, Peak 10A @ 2S LiPo battery |
Output voltage (unregulated for servos) | Identical to the input voltage |
Ampacity (unregulated output) | Permanent 8A, Peak 16A |
Power-on control | LED |
Quiescent current | approx. 3.5mA @ 7.4V |
Max. amount servos | 10 |
Dimensions | 50mm x 39mm x 14mm |
Weight | approx. 86 Gramm |