Difference between revisions of "DPSI RV Mini"
(→Exit battery programming mode) |
(→DPSI RV Mini 6 Magic) |
||
Line 57: | Line 57: | ||
The '''DPSI RV Mini 6 Magic''' has '''6 DPSI channels''' to connect '''6 receiver channels.''' The '''DPSI channel 6 ''' is a [[Servo matching|servo matching channel]] to connect 2 servos at the output side. Both servos get the same receiver signal. One of the two servos acts as MASTER servo, the other one as SLAVE servo. The SLAVE servo can be electronically adjusted to the MASTER servo. With the '''DPSI RV Mini 6 Magic 7 servos''' can be operated on '''5 receiver channels.''' | The '''DPSI RV Mini 6 Magic''' has '''6 DPSI channels''' to connect '''6 receiver channels.''' The '''DPSI channel 6 ''' is a [[Servo matching|servo matching channel]] to connect 2 servos at the output side. Both servos get the same receiver signal. One of the two servos acts as MASTER servo, the other one as SLAVE servo. The SLAVE servo can be electronically adjusted to the MASTER servo. With the '''DPSI RV Mini 6 Magic 7 servos''' can be operated on '''5 receiver channels.''' | ||
[[File: A11036 04 1280x800.jpg|300px|thumb|none|Servo signal distribution of DPSI RV Mini 5]] | [[File: A11036 04 1280x800.jpg|300px|thumb|none|Servo signal distribution of DPSI RV Mini 5]] | ||
+ | |||
+ | ===DPSI RV Mini 6 bavarianDEMON Edition=== | ||
+ | Die '''DPSI RV Mini 6 bavarianDEMON Edition''' verfügt über '''6 DPSI-Kanäle''' an die '''6 Empfängerkanäle''' angeschlossen werden können. Der '''DPSI-Kanal 6''' ist ein [[Servosignalverteilung|Servosignalverteiler]] an den ausgangsseitig '''2 Servos''' angeschlossen werden können. Diese beiden Servos bekommen das selbe Emfpängersignal. Mit der '''DPSI RV Mini 6''' können auf '''6 Empfängerkanälen 7 Servos''' betrieben werden. Die DPSI RV Mini 6 bavarianDEMON Edition unterscheidet sich technisch gesehen von der DPSI RV Mini 6 bzgl. der reglulierbaren Ausgangsspannung (siehe [[#Wahl_der_Ausgangsspannungen|Tabelle 2: Einstellbare Ausgangsspannungen DPSI RV Mini]]). Es bestehen darüber hinaus lediglich optische Unterschiede. | ||
+ | <gallery> | ||
+ | File:A11035 02.jpg|Servosignalverteilung der DPSI RV Mini 6 bavarianDEMON Edition | ||
+ | File:A11035 01.jpg|Servosignalverteilung der DPSI RV Mini 6 bavarianDEMON Edition | ||
+ | </gallery> | ||
==Delivery contents== | ==Delivery contents== |
Revision as of 09:52, 6 July 2018
Contents
Product description
The DPSI RV Mini is a [Dual power supply]] with electronic switch, servo current distribution and servo signal distribution. Depending on the version to the DPSI RV Mini 5 respectively 6 receiver channels can be connected on the input side and 7 respectively 8 servos can be operated on the output side. The Magic version of the DPSI RV Mini are equipped with and integrated servo matching technology. So center position, end positions and direction of the additionally connected servos at the output side can be adjusted.
Features
Feature | implemented |
---|---|
Electronic switch | Yes |
Dual power supply | Yes |
Voltage regulator | Yes |
Servo current distribution | Yes |
Servo signal distribution | Yes |
Servo matching | Yes (Magic versions) |
Versions
The DPSI RV Mini is available in five versions. These differ by the number of DPSI channels as well as the number of servo signal distributors or the servo match channels.
DPSI RV Mini 5
The DPSI RV Mini 5 has 5 DPSI channels to connect 5 receiver channels. The DPSI channels 1, 3 and 5 are servo signal distributors to connect each 2 servos at the output side. Both servos get the same receiver signal. With the DPSI RV Mini 5 8 servos can be operated on 5 receiver channels.
DPSI RV Mini 5 Magic
The DPSI RV Mini 5 Magic has 5 DPSI channels to connect 5 receiver channels. The DPSI channels 1, 3 and 5 are servo matching to connect each 2 servos at the output side. Both servos get the same receiver signal. One of the two servos acts as MASTER servo, the other one as SLAVE servo. The SLAVE servo can be electronically adjusted to the MASTER servo. With the DPSI RV Mini 5 Magic 8 servos can be operated on 5 receiver channels.
DPSI RV Mini 6
The DPSI RV Mini 6 has 6 DPSI channels to connect 6 receiver channels. The DPSI channel 6 is a servo signal distributor to connect 2 servos at the output side. Both servos get the same receiver signal. With the DPSI RV Mini 6 7 servos can be operated on 5 receiver channels.
DPSI RV Mini 6 Magic
The DPSI RV Mini 6 Magic has 6 DPSI channels to connect 6 receiver channels. The DPSI channel 6 is a servo matching channel to connect 2 servos at the output side. Both servos get the same receiver signal. One of the two servos acts as MASTER servo, the other one as SLAVE servo. The SLAVE servo can be electronically adjusted to the MASTER servo. With the DPSI RV Mini 6 Magic 7 servos can be operated on 5 receiver channels.
DPSI RV Mini 6 bavarianDEMON Edition
Die DPSI RV Mini 6 bavarianDEMON Edition verfügt über 6 DPSI-Kanäle an die 6 Empfängerkanäle angeschlossen werden können. Der DPSI-Kanal 6 ist ein Servosignalverteiler an den ausgangsseitig 2 Servos angeschlossen werden können. Diese beiden Servos bekommen das selbe Emfpängersignal. Mit der DPSI RV Mini 6 können auf 6 Empfängerkanälen 7 Servos betrieben werden. Die DPSI RV Mini 6 bavarianDEMON Edition unterscheidet sich technisch gesehen von der DPSI RV Mini 6 bzgl. der reglulierbaren Ausgangsspannung (siehe Tabelle 2: Einstellbare Ausgangsspannungen DPSI RV Mini). Es bestehen darüber hinaus lediglich optische Unterschiede.
Delivery contents
DPSI RV Mini battery backer, switch actuator, patch cables.
Operating
Output voltage selection
The output voltage of the DPSI RV can be selected in two steps for the receiver and for the servos. This can be done with the enclosed jumpers which must be plugged to the slot at the housing depending on the desired output voltage.
In the example the servos will be supplied with the full battery voltage, the receiver will be suppied with 5.9 volts.
Die following output voltages are possible:
Version | Output voltage receiver | Output voltage servos |
---|---|---|
DPSI RV Mini 5 / Mini 5 Magic | 5.9V or 5.2V | 5.9V or full battery voltage |
DPSI RV Mini 6 / Mini 6 Magic | 5.9V or 5.2V | 5.9V or full battery voltage |
DPSI RV Mini 6 bavarianDEMON Edition | Full battery voltage or 6V | Full battery voltage or 6V |
Switching on and off
The DPSI RV Mini can be switched on and off by using the connected switch actuator. After switching on the DPSI RV Mini the LED of connected switch actuator as well as the red status LED at the DPSI RV Mini's housing. Shortly after the buzzer and the LEDs show the programmed battery type optically and acoustically. Then both LEDs change to permanent shining.
Main article: DPSI switch actuators
Batteries
Battery types
The following battery types can be used:
- 5S to 7S NiCd
- 5S to 7S NiMH
- 2S LiIon
- 2S LiPo
- 2S LiFePO4
Starting battery programming mode
The battery programming mode is started if only one battery is connected to an arbitrary battery input of the DPSI RV Mini and then it is switched on. The buzzer will beep for 3 seconds, followed by a 3 second break. The DPSI RV Mini now is in programming mode.
Battery programming
Now the buzzer outputs a sequence of beep signals for the corresponding battery types (Tab. 2), followed by an 3 second break. The red LEDs at the housing and inside the connected switch actuator flash synchronized with the beeper. If the desired battery type is displayed the programming mode must be closed within the 3 second break before the next battery type is displayed with a new beep signal.
Exit battery programming mode
The battery programming mode will be quit if the second battery is connected within the 3 second break between the blinking codes.
Blinking code | Battery type | Nominal voltage |
---|---|---|
1x Blink | 5 NiCd/NiMH cells | 6.0 |
2x Blink | 6 NiCd/NiMH cells | 7.2V |
3x Blink | 2 LiIon cells | 7.2V |
4x Blink | 2 LiPo cells | 7.4V |
5x Blink | 2 LiFePO4 cells | 6.6V |
6x Blink | 7 NiCd/NiMH cells | 8.4V |
7x Blink | Deactivate test | --- |
If "7x Blink" (Deactivate test) is selected the DPSI RV Mini doesn't perform a voltage test. So empty batteries or similar errors will not be displayed.
Anschließen des Empfängers und der Servos
Der Empfänger wird mit den mitgelieferten Patchkabeln an den "RECEIVER INPUT"-Eingängen des DPSI RV Mini angeschlossen.
Die Patchkabel müssen mit der braunen Minusleitung nach oben, mir der orangen Impulsleitung nach unten angeschlossen werden.
Servo-Matching
Specifications
Power sources | 5 to 5 cell NiCD / NiMH batteries, 2 cell LiIon, LiPo, LiFePO4 batteries |
---|---|
Operating voltage range | 5.0V ... 13V |
Nominal input voltage | 6.0V ... 8.4V |
Output voltage receiver | 5.2V or 5.9V selectable by jumper |
Output voltage servos | 5.9V or full battery voltage selectable by jumper |
Quiescent current (switched off) | Approx. 1µA per battery |
quiescent current (switched on) | Approx. 55mA (Magic versions approx. 70mA) |
Max. permanent current @ 5.9V (15 minutes with LiPo batteries) | 5A |
Max peak current @5.9V | 50A |
Drop out loss @ 4A | 0.4V |
Maximale Verlustleistung (Dauer) | 8W |
Amount of servos inside system | Up to 10 servos |
CE approvals | according to 2004/108/EC |
Environmental conditions | -10°C ... +50°C |
Permissible temperature range | -25°C .... +85°C (Storage) |
LCL filtering (EMI) | For each individual servo output |
nterference Suppression at 35MHz | -20dB @ 35MHz, -34dB @ 100MHz |
Dimensins | 77mm x 99mm x 15,8mm |
Weight | Ca. 105g |